This new system is applied on the new Malossi Multivar 2000 MHR Next variator, which combined with the other components allows to obtain truly unique performances

The mobile semi pulley is the characteristic component of the whole system and for this reason it is subject to constant evolution.

Designed with a larger diameter than the original one, it allows to obtain a significantly larger gear ratio displacement than the original pulley

Variator kit for T-MAX 560cc JCosta XRP complete with Kevlar belt and washer specially designed for the crankshaft.

This kit includes 2 sets of masses for adjustment depending on whether the stock exhaust is fitted or not.

Recommended:

- 14.5g masses: Non stock exhaust

- 15.5g masses: Stock Exhaust

• Length: 875 mm
• Thickness: 31,2 mm
• Working angle: 28º
• Tooth height: 8,5 mm

High quality rubber and aramid (kevlar) belt for XRP drive equipped models. It increases the resistance compared to an original (stock) belt to support the increased performance offered by the XRP range of drives.

The dimensions of the belt are different from the stock ones, thus ensuring a correct operation without rubbing on the inner surface of the transmission or crankcase cover.

Bushing made of copper-tin alloy with high quality graphite inserts.

No grease or lubricants are required for operation with the JCosta pin. The bushing is self-lubricating due to the combination of its manufacturing elements

Replacement pin for JCosta variator with anti-friction treatment and wear protection. Improves the performance of the transmission system of your scooter with its compatible variators.

Set of masses composed of 16 units of 34mm.

High resistance plastic masses with a kevlar and carbon fiber compound for better sliding and durability.

Anti-friction ring centered on your wheel with variable contrast.
A secret of the competition cast
Lightweight, perfect: in the simplicity of a high-tech concentration, the design and composition of the materials are the result of a license

CLUTCH SPRING NOT INCLUDED

Advantages:

• Immediate throttle response.
• Accurate customization of the contrast spring behavior.
• No structural modifications are required.

Variator Malossi Multivar 2000 for Yamaha T-Max 530cc ie LC 4T 12-16.

Significantly improves acceleration and engine response at all RPM

12 and 14 grams

The hardness of the clutch spring determines whether the mechanism opens the clutch to engage the clutch bell at higher or lower engine revolutions.

A harder spring will make the clutch "engage" at higher revs and consequently the bike will start faster from a standstill and you will notice a better acceleration.

In other words, a soft spring is as if you were leaving in "second gear", with a hard spring it is as if you were leaving in "first gear",

Be careful with your choice because if it is too hard, you need more power and more RPM to start from a standstill.

Malossi springs are made of high-carbon silicon alloy steel, heat-treated to better resist high temperatures, and do not lose power at high temperatures

The variator locking key for Yamaha Tmax (all models) and easily install the variator or the belt of your Tmax 500 / 530 / 560 (all models). Thanks to this tool you can easily replace the variator rollers of your maxiscooter. It is made of 5mm thick stainless steel and is delivered with all the screws to be able to use it.

Contributing to engine longevity, HIFLOFILTRO filters are recognized for the choice of materials and quality construction of the filter elements. Hiflofiltro air filters are manufactured to fit the factory air box and are a direct replacement for OE filters.

• Composed of paper pulp, fiber and resin, which are processed to obtain the thickness and density to provide optimum filtration.
• Developed for modern high performance engines.
• Original manufacturer's replacement